Inserting Tabs Into A Print Job - Muratec MFX-C2280 Feature Overview Manual

Inserting Tabs into a Print Job

It is recommended that this be done on Single Reverse or Reverse Collated, 5 Print
On Tabs . Otherwise tabs will have to be manually reversed before printing .
The MFP will not punch holes in a print job when tabs are inserted so the entire job
must be punched with a separate device for insertion into a binder.
The MFP will only pull tabs from the Bypass Tray and pulls from the top, so the tabs
must be ordered with Tab 1 towards the front of the MFP, Tab 2 next from the front
of the MFP, Tab 3 next and so on .
AT THE DEVICE
1 . From the Copy screen touch Paper Settings .
2 . Select the Bypass Tray .
3 . Touch Change Tray Setting .
4 . Select Index Paper .
5 . Touch Close .
6 . Load Tab Paper in the Bypass Tray with the tabs facing Out .
Multiple Sets can be printed at one time.
FROM THE COMPUTER
1 . When Tabs will be inserted as part of a multipage print job .
2 . Once document is ready to print, if it is required that the first tab come
before page 1 of the document, a blank page must be inserted at the front
of the document .
3 . To create a 25 page test document, open Microsoft Word and type
=rand(101,20) . Go to the very front of the document and insert a blank page .
4 . Click File and Print .
5 . Click on Properties . On My Tab or the Layout Tab select 1 Sided .
6 . Select the Cover Mode tab on the print driver and select Per Page Settings .
11