Print Machine Parameters, Memory Switch And Unique Switch Settings; Factory Functions; Function List; Led Test - Muratec MFX-1600 Field Engineering Manual

3.12 Print Machine Parameters, Memory Switch and
Unique Switch Settings
This function instructs the unit to print a list of the machine parameter, memory switch and unique switch
settings. The list shows the default and current settings for each. After printing, the unit returns to standby.
1. Press Program key, *, A(01).
Memory Switch
** Printing **

3.13 Factory Functions

This factory functions provide several machine testes including LED and LCD tests, a keypad test,
memory tests, a RTC test, and optional RS-232C test port test.
1. Press Program key, *, B(02).
Factory Function
2. To select the desired test mode, press One-touch A(01)-H(08) as indicated in the following list.
(A detailed explanation of each mode follows this list.)
One-touch A(01) = Prints a list of the Factory Functions
One-touch B(02) = LED test
One-touch C(03) = LCD test
One-touch D(04) = Key Panel test
One-touch E(05) = SRAM check
One-touch F(06) = DRAM check
One-touch G(07) = RTC test
One-touch H(08) = RS-232C port test (optional RS-232C port required)

3.13.1 Function List

Press Program key, *, B(02). Then press One-touch A(01). A list of the Factory Functions will print. After
printing the unit will return to standby.

3.13.2 LED Test

1. Press Program key, *, B(02). Then press One-touch B(02).
Pressing START once, all green LEDs will turn on.
Pressing START twice, all red LEDs will turn on.
Pressing START three times, all LEDs will turn on.
2. Press STOP to exit the test mode.
3-66