Unique Switch F:2 - Printer; Unique Switch F:5 - Printer - Muratec MFX-1600 Field Engineering Manual

Unique Switch f:2 - Printer

Initial
Switch
Setting
7 0 Factory use only
6 0 Factory use only
5 0 LED print head exposure
time adjustment for lists, test
4 0
patterns and PCL printing
3 0
2 0
1 step = 1.74 s
1 0
0 0
Note: This setting effects
after turning the power switch
off/on.
Unique Switch f:3

Unique Switch f:5 - Printer

Initial
Switch
Setting
7 1 Factory use only
6 0 Limit of the memory capacity
in Reverse order print
5 1
4 0 Ignore the size error with
bypass tray
0: No
1: Yes
3 0 Factory use only
2 0 Make masking for A4 sized
paper
0: Yes
1: No
1 0 Factory use only
0 1 Primary copying upon
printing the received data
0: No
1: Yes
Adjust
Initial setting is "000000" and 28.65 sec. If you
want to change the exposure time, set this switch
within the following range.
If you set the time to be shorter, the print density will
be light.
Switch 5 4 3 2 1 0
f:4 --- Factory use only
Adjust
Determine the limit of the memory capacity for
storing the received document in the reverse order
print. If the data reached to this limit during
receiving, the normal order print will start.
Setting to "0", the machine makes masking of 3mm
each on the right, left, upper and lower side.
Setting to "1", the machine makes no masking on
the right and left side when printing on the A4 sized
paper.
Note: The machine always makes the upper and
lower masks regardless of this setting.
Setting to "1", the copying job will interrupt the
printing job of received document.
3-54
Usage/Comments
1 0 0 0 0 0 54.69 sec Darkest
|
1 1 0 0 0 1 25.17 s
1 1 0 0 0 0 26.91 s
1 0 1 1 1 1 28.65 s
1 0 1 1 1 0 30.38 s
1 0 1 1 0 1 32.12 s
|
1 1 1 1 1 1 0.87 s
Usage/Comments
Switch 6 5
0 0 126 KB
0 1 521 KB
1 0 1024 KB
1 1 2048 KB
Lightest