Page Counter; Packaging Contents; Installation - Muratec MFX-1600 Field Engineering Manual

6.3 Page Counter

The mechanical counter shows the total number of pages the machine prints.
Note: This device counts up to 999,999 pages. If more pages are printed, the counter resets to zero and
begins counting the new pages from that point.

Packaging contents:

(1) Mechanical Counter .......................... 1
(2) Connection harness .......................... 1

Installation

1. Turn the power off.
2. Remove the rear cover and shield plate.
3. Attach the connection harness to the connector labeled P21 on the main control PCB. Then re-attach
the shield plate.
4. Use nippers (or cutters) to gently punch out the perforated panel on the left side of the rear cover.
5. Insert the mechanical counter into this hole, being careful to pass the counter harness through the hole
first. The counter will "click" into place when inserted correctly.
Note: The mechanical counter should be installed so that the small circle on its front is positioned in the
bottom right corner, as in the picture to the right.
6. Connect the counter harness to the connection harness.
7. Re-attach the rear cover.
Note: Do not forget connecting the speaker harness.
Speaker harness
Circle on page counter should
be positioned to the bottom left,
when installed.
6-7
Counter harness