Pds / Thermistor; Exit Roller P - Muratec MFX-1600 Field Engineering Manual

PDS / Thermistor

1. Remove the FIXING UNIT.
2. Remove the FIXING UNIT COVER, and then remove the PDS or the thermistor.

EXIT ROLLER P

1. Remove the FIXING UNIT.
2. Disassemble the FIXING UNIT to remove the EXIT ROLLER P.
Note: Do not bend the PLATE SPRING at removing or attaching the EXIT ROLLER P.
Exit roller P
Themistor
PDF
Fxing unit cover
5-41
Plate spring