Muratec MFX-1600 Field Engineering Manual page 27

Fusing temperature
1) Warming Up After the initialization of the printer, warming up of the printer starts and the Heater
Lamp turns ON until the temperature of the Heater Roller reaches approx. 185 °C.
2) Printing When the printer obtains the printing command from its controller, the Heater Roller
is maintained at 185 °C.
After printing, the printer turns to standby mode. The fuser kept at low temperature.
3) Standby mode The Heater Roller maintained at approx. 100 °C.
4) Sleep mode In this mode, saving the power.
Temperature
( F) ( C)
392 200
356 180
320 160
Warming up
Power ON
Post card printing only
Printing
Standby mode
2-16
Time
Sleep mode