Table of Contents
Advertisement
When replacing the system board, be sure that the following components are removed from
the defective system board and installed on the replacement system board:
●
Fans (see
●
Memory module (see
●
Heat sink (see
Remove the system board:
1.
Disconnect the webcamera/microphone module cable (1) from the system board.
2.
Disconnect the display panel cable (2) from the system board.
3.
Release the display panel cable (3) from the heat sink. (The display panel cable is attached to
the heat sink with double-sided tape.)
58
Chapter 4 Removal and replacement procedures
Fan on page
55)
Memory module on page
Heat sink on page
60)
61)
Advertisement
Table of Contents
