Table of Contents
Advertisement
Battery
Description
4-cell, 58-Wh, 4.1-Ah, Li-ion battery
Before disassembling the computer, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
Remove the battery:
1.
Turn the computer upside down on a flat surface.
2.
Slide the battery cover lock latch to the left (1) to unlock the batter cover.
3.
Firmly slide the battery cover release latch to the right (2) to release the battery cover.
4.
Slide the battery cover (3) away from the computer.
5.
Remove the battery cover. The battery cover is available using spare part number 672012-001.
6.
Disconnect the battery cable (1) from the system board.
7.
Remove the three Torx T8M2.0×5.4 screws (2) and the five Torx T8M2.0×3.6 screws (3) that
secure the battery to the computer.
Spare part number
665460-001
Component replacement procedures
33
Advertisement
Table of Contents
