Internet Time; Access Control; Passwords - Comtrend Corporation WAP-5813n User Manual

The Get RPC Methods button forces the CPE to establish an immediate connection
to the ACS. This may be used to discover the set of methods supported by the ACS
or CPE. This list may include both standard TR-069 methods (those defined in this
specification or a subsequent version) and vendor-specific methods. The receiver of
the response MUST ignore any unrecognized methods.

8.4 Internet Time

This option automatically synchronizes the router time with Internet timeservers.
To enable time synchronization, tick the corresponding checkbox
preferred time server(s), select the correct time zone offset, and click Save/Apply.
NOTE: Internet Time must be activated to use
addition, this menu item is not displayed when in Bridge mode since the
router would not be able to connect to the NTP timeserver.

8.5 Access Control

8.5.1

Passwords

This screen is used to configure the user account access passwords for the device.
Access to the WAP-5813n is controlled through the following three user accounts:
• 1234 - this has unrestricted access to change and view the configuration.
• support - used for remote maintenance and diagnostics of the router
• user - this has limited access. This account can view configuration settings and
statistics, as well as, update the router firmware.
Use the fields below to change password settings. Click Save/Apply to continue.
Parental Control
63
, choose your
(page 31). In