Table of Contents
Advertisement
Enable WAN Service checkbox:
Tick this item to enable the ATM service. Untick it to stop the ATM service.
Service Name: This is the WAN Service label.
STEP 5: Click Next to display the WAN Setup - Summary screen that presents the
entire configuration summary. Click Back to modify the settings.
STEP 6: Click Save/Reboot to apply these settings. The configuration will be
saved to flash memory and then the device will reboot. After the device
reboots, the Web UI should refresh the browser window. If the browser
does not refresh, restart the browser and login again.
3.1.2 Setup LAN port
This screen allows the user to configure the LAN Interface on the device.
9
Advertisement
Table of Contents
