Xerox WorkCentre 7120 System Administrator Manual page 125

13. Under Secondary SIP Proxy Registrar Server Setup, type information about your secondary
proxy server.
14. Click Apply.
Registering VoIP Gateways
In CentreWare IS, click Properties > Protocols > VoIP Gateway.
1.
2. Click Create to add a new SIP Gateway ID.
3. Type an ID and IP address of the gateway.
Note: You can register up to 50 Gateways.
4. Click Apply.
Configuring T.38 Settings
In CentreWare IS, click Properties > Connectivity > Protocols > T.38.
1.
2. Select a T.38 Transport Protocol to prioritize TCP or UDP packets.
3. Edit the default Listening Port Numbers if necessary.
4. Next to Prioritize IP Packets, type a number to set the priority of T.38 packets relative to other IP
network activity. A higher number indicates higher priority.
5. Click Apply.
Configuring other SIP Fax Settings
To set SIP fax line names and other fax settings, see:
• Configuring Fax Settings
• Setting Fax Defaults
• Setting Incoming Fax Options
on page 114
on page 116
on page 116
WorkCentre 7120/7125 Multifunction Printer
System Administrator Guide
Faxing
125