Xerox WorkCentre 7120 System Administrator Manual page 28

Network Configuration
5. Under Traps, select the type of Traps to be Received by the SNMP manager.
6. Click Apply.
Adding IPX Trap Destination Addresses
Internetwork Packet eXchange (IPX) is a routing protocol used by Novell NetWare environments.
1. In CentreWare IS, click Properties > Connectivity > Protocols > SNMP.
Click Advanced at the bottom of the page.
2.
3. Under Trap Destination Addresses, click Add IPX Address.
Type the 8-digit hexadecimal number that identifies the IPX External Network host configured to
4.
receive the trap.
5. Type the 48-bit Physical MAC Address of the computer running the SMNP manager application
that is to receive the trap.
Type the IPX Socket Number of the computer running the SNMP manager application configured
6.
to receive the packets.
7. Select the SNMP version, SNMP v1 or SNMP v2c based on the trap receiving system.
8. Under Traps, select the type of Traps to be Received by the SNMP manager.
28 WorkCentre 7120/7125 Multifunction Printer
System Administrator Guide