Book Copy; Program Job; Non-Image Area Erase - Oce 3275 User Manual

Shortcuts

Book Copy

(p. 9-19)
1 First, load letter sheets in a regular tray or in the Multi-sheet bypass tray.
2 Touch to display the Application selection screen.
APPLI.
3 Touch
Book Copy
area erase selected.
4 Touch ,
Full scan Front cover + Full scan
To change the binding mode, touch
5 Touch to return to the Application selection screen.
OK
6 Make additional copying selections.
7 Touch to return to the Basic screen with the Store mode automatically selected.
OK
8 Select 1-1 or 1-2 copy mode and enter the print quantity amount.
9 Position the open book in the right rear corner on the platen glass.
10 Align the edges of the book with the right measuring guide plate, then press [ START ]
to begin scanning.
11 Repeat Steps 9 to 10 to copy subsequent pages from the book, pressing [ START ] to
scan each page.
12 Touch to remove its highlight and thus turn off the Store mode.
STORE
13 Press [ START ]. When copying is completed, press [ AUTO RESET ] to reset the machine.

Program Job

(p. 9-21)
1 Touch to display the Application selection screen.
APPLI.
2 Touch
Program Job
JOBs) and then to output them all as a complete set.
3 Make additional copying selections for the first JOB.
4 Touch to return to the Basic screen. Store mode is automatically selected.
OK
5 Position original(s) face up in the document feeder or face down on the platen glass,
select the tray you want to use, then press [ START ] to scan.
6 When scanning for the current JOB is completed, the popup menu will be displayed.
To store the current JOB images, touch
To delete the images, touch
7 Repeat steps 3 to 6 until all JOB originals are scanned.
8 Select the desired output mode and enter the print quantity amount.
9 Touch to remove its highlight and thus turn off the Store mode.
STORE
10 Press [ START ]. When copying is completed, press [ AUTO RESET ] to reset the machine.

Non-Image Area Erase

1 Touch to display the Application selection screen.
APPLI.
2 Touch
Non-Image Area Erase
3 Make additional copying selections.
4 Touch to return to the Basic screen.
OK
5 Enter the print quantity amount.
6 Position original face down on the platen glass, keeping the document cover open.
7 Press [ START ]. When copying is completed, press [ AUTO RESET ] to reset the machine.
13-6 Shortcuts
to display the Book copy screen with AUTO layout and Non-image
, or
REVERSE THE SIDE OF OPEN PAGE
to scan multiple sets of originals in different settings (called
.
CANCEL
(p. 9-23)
.
Front/Back cover + Full scan
.
DECISION
, as required.
.