Original Form - Oce 3275 User Manual

Special Original

Original Form

The copier usually detects the standard size of originals fed through RADF or positioned
on the platen glass (STD size mode).
Use Non STD size mode to specify the scanning area manually for copying or printing
special size originals. Use Tab paper mode to copy tabbed original including the image
on the tab part onto tabbed copy paper.
Scanning sizes in Non STD size mode: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"R, A3,
B4, A4R, B5R, A4, B5, WHOLE AREA
Original sizes in Tab paper mode: 8.5"x14", 8.5"x11"R, 8.5"x11", A3, B4, A4R, A4, B5
Tab extension width: 0.5" (12.5 mm) or less
Incompatible Basic Copying Conditions: Folding / Stapling & Folding / Trimming with Booklet,
Punching
Incompatible Special Original: Mixed Original (Non STD Size and Tab Paper cannot be
selected at the same time.)
Incompatible Applications: Combination, Booklet, Book Copy, Non-Image Area Erase, Image Shift,
Storing image in Overlay Memory
Special Original Screen
1 Touch
SPECIAL ORIGINAL
2 Touch
Non STD Size
3 Touch the desired size key. When selecting
menu, the copier scans the whole area of the platen glass and copies with the paper
size or magnification ratio currently selected.
4 Touch on the popup menu of the size keys.
OK
5 Touch to complete the setting and return to the Basic Screen.
OK
6 Make other compatible selections.
7 Position original(s) FACE UP in the document feeder, or FACE DOWN on the platen glass.
8 Press [ ]. After copying is completed, press [
START
and reset the machine.
8-12 Special Original
on the Basic Screen to display the Special Original Screen.
or .
Tab paper
Popup menu for Non STD size mode
Popup menu for Tab paper mode
on the Non STD size mode
WHOLE AREA
] to release the mode
AUTO RESET