Oce 3275 User Manual page 237

Tandem Mode
To Stop Scanning/Printing
To cancel the tandem copying job:
1 Press [ ] on the control panel of the primary copier.
STOP
The scanning/printing job stops immediately, and the popup menu appears on the
Basic Screen of the primary copier to ask you whether to continue or terminate the
job. At this time, the tandem mode is not released.
2 Touch to go on, or
CONTINUE
tandem mode.
To cancel the job in the secondary copier only:
1 Press [ ] on the control panel of the secondary copier.
STOP
The secondary copier stops the current operation immediately, and the popup menu
appears on the Basic Screen of the secondary copier to ask you whether to continue
or cease the operation. At this time, the tandem mode is not released.
NOTE: If temporary suspension in the secondary copier takes a long time, the Allocation recovery mode will
activate, enabling the primary copier to handle the remaining print quantity.
2 Touch to go on, or
CONTINUE
copier and to release the tandem mode.
The primary copier will take over the remaining print quantity and complete the job.
NOTE: Once the Allocation recovery mode is activated and the primary copier is already handling the
remaining print quantity, the secondary copier cannot continue with the tandem printing job, even
when CONTINUE is touched on the popup menu.
to delete all the scanned data and to release the
EXIT
to delete all the data transmitted to the secondary
EXIT
Tandem Mode 12-5