Oce 3275 User Manual page 107

Basic Operations
Check Mode and Proof Copy (continued)
1 Press [ ] on the control panel to display the Check Screen.
CHECK
2 Verify the settings made for the current job.
3 If necessary, press [
Check Screen to output a set of sample copy.
If only one copied set is needed and the sample set is adequate, press [
delete the stored data.
4 Touch (or press [
EXIT
Screen.
5 Press [ ] when the Basic Screen is displayed.
START
If set quantity is two or more, the copier will output the rest except the sample sets.
Change/Release Settings
If you want to change or release any settings, follow the procedure below.
To change the settings:
Check Screen
Basic Screen
] on the control panel or touch
PROOF COPY
]) to exit from the Check mode and return to the Basic
CHECK
on the
PROOF COPY
] to
STOP
Basic Operations 6-35