Limited Use Of The Copier In Trouble - Oce 3275 User Manual

Troubleshooting
Call for Service (continued)

Limited Use of the Copier in Trouble

If the message shown below is displayed on the Call for Service Screen, you may
continue operating the copier on a limited function basis and utilize the trays and ADU
that are not affected by the trouble. To obtain this limited functionality of the copier,
consult your Océ service representative. Be sure to utilize the limited function only
temporarily, and arrange for machine repair immediately.
1 If limited use of the copier is available, the following message is displayed in the
message area instead of the Report code.
Tray 1 failure
Press AUTO to select except this tray
2 Press [
AUTO RESET
Please switch ON/OFF
E 18-2
3 Turn OFF then ON the power switch.
A copying job can be continued without using the troubled portion of the machine (ex.
Tray 1).
CAUTION
EVEN IF THE COPYING JOB CAN BE CONTINUED WITH THE ABOVE OPERATION, IMMEDIATELY
CONTACT YOUR KONICA SERVICE REPRESENTATIVE WHEN THE CALL FOR SERVICE SCREEN
IS DISPLAYED.
].
Troubleshooting 16-3