Overlay - Oce 3275 User Manual

Applications

Overlay

Use Overlay to scan an image, then overlay the image onto each page copied in the job.
Scan and store originals into memory.
APS and AMS are automatically released.
Magnification is initially set to 1:1. This setting is changeable.
Original/Copy size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"
Incompatible Basic Copying Conditions: None
Incompatible Special Originals: Resolution (Very high), Mixed Original, SDF
Incompatible Applications: Sheet/Cover Insertion, Combination, Transparency Interleave,
Image Insert, Book Copy, Program Job, Repeat, AUTO Layout, Reduce & Shift in Image Shift,
WATERMARK, WATERMARK NUMBERING, Overlay Memory
1st scanned original
Application Selection Screen
1 Touch on the Basic Screen to display the Application Selection Screen.
APPLI.
2 Touch
Stamp/Overlay
3 Touch to highlight it.
OVERLAY
4 Touch to return to the Application Selection Screen.
OK
5 Make additional application selections, or touch
6 The Store mode is automatically selected, and APS and AMS are released.
Set the desired Copy mode, Copy density, Lens mode, and Copy size on the Basic
Screen.
Originals scanned
2nd and later
. The Stamp/Overlay Selection Screen will be displayed.
Copies in OVERLAY mode
Stamp/Overlay Selection Screen
to return to the Basic Screen.
OK
Applications 9-43