Mixed Original; Sheet/Cover Insertion - Oce 3275 User Manual

Shortcuts
Stapling & Folding, Folding, and Trimming
1 Close the RADF (document feeder cover), then press [ AUTO RESET ] to reset the
machine.
2 Touch
OUTPUT APPLI.
3 Touch
STAPLING & FOLDING
mode automatically selected; or touch
Touch to select/deselect the Trimming mode, as desired.
TRIM
4 Touch to display the Basic screen.
OK
5 Make additional copying selections.
6 Enter the print quantity amount.
7 Position originals on the RADF tray.
8 Press [ START ]. When copying is completed, press [ AUTO RESET ] to reset the machine.

Mixed Original

(p. 8-8)
1 Touch
SPECIAL ORIGINAL
2 Touch
Mixed Original
3 Make additional copying selections.
4 Touch OK to return to the Basic screen.
5 Select APS to copy on various sizes to match the originals, or select AMS mode to
copy on one size.
6 Enter the print quantity amount.
7 Position mixed originals face up on the RADF (document feeder) tray.
Combine ledger, legal, letter, 5.5"x8.5"/or legal, letter R, letter.
8 Press [ START ]. When copying is completed, press [ AUTO RESET ] to reset the machine.

Sheet/Cover Insertion

1 Touch to display the Application selection screen.
APPLI.
2 Touch
Sheet/Cover Insertion
3 If desired, touch
FRONT COPY
If desired, touch
BACK COPY
4 If desired, touch
COPY INSERTION
Enter the page number for the first insertion location, then touch
5 Repeat Step 4 for each insertion location, touching
6 Select the desired tray source for the cover and /or insertion sheets.
7 Touch to return to the Application selection screen.
OK
8 Make additional copying selections.
9 Touch to return to the Basic screen.
OK
10 Enter the print quantity amount.
11 Position originals face up on the document feeder tray.
12 Press [ START ]. When copying is completed, press [ AUTO RESET ] to reset the
machine.
to display the Finisher mode selection screen.
to select the Stapling & Folding mode with Trimming
FOLDING
to display the Special original screen.
.
(p. 9-3)
to display the Sheet/Cover insertion screen.
or
FRONT BLANK
or
BACK BLANK
or
BLANK INSERTION
(p. 7-13)
to select the Folding mode.
.
.
.
SET
after each entry.
SET
.
Shortcuts 13-3