Table of Contents
Advertisement
Applications
AUTO Layout (continued)
1 Touch
on the Basic Screen to display the Application Selection Screen.
APPLI.
2 Touch
AUTO Layout
3 Select additional copying features, as desired. When using RADF to scan originals,
touch
Non-image Area Erase
4 Touch
to complete the setting and return to the Basic Screen.
OK
5 Select the desired copy size.
6 Enter the desired print quantity.
7 Position original(s) FACE UP in the document feeder or FACE DOWN on the platen
glass.
IMPORTANT: DO NOT CLOSE THE DOCUMENT FEEDER WHEN USING PLATEN GLASS.
PLACING ORIGINAL OBLIQUELY ON THE PLATEN GLASS MAY CAUSE BLACK COPY
MARKS.
When using Platen store mode, see p. 6-27 to p. 6-28.
When using RADF store mode, see p. 6-29.
Option: Press [CHECK] to view the selection, and make a Proof copy if desired; then touch EXIT to return
to the Basic Screen. See p. 6-34 to p. 6-36.
8 Press [
].
START
After copying is completed, touch
press [
AUTO RESET
9-32 Applications
. The incompatible function keys will be dimmed to show inactivity.
to deselect it.
AUTO Layout
] to release the mode and reset the machine.
on the Application Selection Screen or
Advertisement
Table of Contents
Troubleshooting
