Overview - Polycom 7000 Integration Manual

Overview

Note
To integrate the SoundStation IP 7000 conference phone with a Polycom HDX
system or Polycom RealPresence Group system, complete the following steps:
1. (Optional, but highly recommended.) Connect the phone to the local area
network (LAN) using the supplied network cable. Refer to
the Phone to the Network
2. (Optional; requires step 1.) Upgrade the phone before connecting it to the
Polycom HDX system or Polycom RealPresence Group system.
To determine the software version running on the phone, press the
Menu key, and then select Status > Platform > Application > Main.
Refer to Upgrading the Phone's Software
3. Set up the Polycom HDX system or Polycom RealPresence Group system.
Refer to Setting Up the Polycom HDX or Polycom RealPresence Group
System on page 6.
4. Verify the Polycom HDX system software. To verify the software, go to
System > System Information.
If necessary, update the software so it can work with the phone. Refer to
Updating the Polycom HDX System Software
You don't have to verify the Polycom RealPresence Group system software; the
SoundStation IP 7000 phone will work with all system versions.
5. Connect the phone to the Polycom HDX system or Polycom RealPresence
Group system. Refer to
System or Polycom RealPresence Group System
6. Make any optional changes to the phone and connect the phone to any
optional components. Refer to
Integrating the SoundStation IP 7000 Phone
on page 6.
on page 13.
Connecting the Phone to the Polycom HDX
Setting Up the Phone
Connecting
on page 7.
on page 7.
on page 9.
5