Polycom 7000 Integration Manual page 23

— If DHCP is not supported on the network:
Select Ethernet Menu.
a
Scroll to Phone IP Addr, then press the EDIT soft key. Enter the
b
phone IP address, then press the OK soft key.
Scroll to Subnet Mask, then press the EDIT soft key. Enter the
c
subnet mask, then press the OK soft key.
Scroll to IP Gateway, then press the EDIT soft key. Enter the IP
d
gateway address, then press the OK soft key.
Press the EXIT soft key.
e
Scroll to DNS Server, then press the EDIT soft key. Enter the DNS
f
server address, then press the OK soft key.
Press the EXIT soft key.
g
Scroll to DNS Domain, then press the EDIT soft key. Enter the
h
DNS domain name, then press the OK soft key.
5. Select Provisioning Server.
6. Scroll to Server Type and select the server type that is appropriate to
your environment.
For example, if you are using an FTP server, verify that the Server Type is
set to FTP. To change it to FTP from another value, press the EDIT soft
key, use the right arrow key to select FTP, and then press the OK soft key.
7. Scroll to Server Address, then press the EDIT soft key. Enter the IP
address of the computer that is running the server, then press the OK soft
key.
If your computer is running the FTP server, then enter your computer's IP
address.
8. Scroll to Server User, then press the EDIT soft key. Enter the user name,
then press the OK soft key.
This is the user name you created when you set up the provisioning server.
9. Scroll to Server Password, then press the EDIT soft key. This is the
password you created when you set up the provisioning server.
10. Press the EXIT soft key twice.
11. Select Save & Reboot.
The phone will reboot. While the phone reboots, several messages will
display. The upgrade process will take some time.
Integrating the SoundStation IP 7000 Phone
17