Polycom 7000 Integration Manual page 14

Integration Guide for the Polycom SoundStation IP 7000 Phone Connected to a Polycom HDX System or Polycom RealPresence Group
System in Unsupported VoIP Environments
Note
8
2. Connect one end of the Polycom Microphone Array Cable into an
available microphone connector on the phone.
The following figure shows how to connect the Polycom Microphone
Array Cable to an available microphone connector on the phone. The other
end of the cable connects to the Polycom HDX system or Polycom
RealPresence Group system.
Polycom HDX 9000 systems require an adapter to plug in the Polycom Microphone
Array Cable. The adapters are shipped with the cables for the Polycom HDX 9000
systems only.
3. Attach the Polycom Microphone Array Cable to the Polycom HDX
system or Polycom RealPresence Group system. For information on
where the microphone connector is located on the system, refer to the
'Optional setup' instructions in the Setup Guide for your system,
available by navigating to your system from the Video Support page.