Printing Double-Sided Copy - Xante PlateMaker 3 Manual

Use the following guidelines and the procedure in "Tray Selection
Options" in chapter 6 to use the tray chaining feature.
• All selected media sources must contain the same size media. If
the printer detects a different size media when it switches to a
new tray, a PAPER OUT message appears.
• All trays must be properly inserted. When tray chaining is
enabled, an incorrectly positioned tray will prevent the printer
from printing.

Printing Double-Sided Copy

You can print double-sided copy manually by feeding paper through
the printer twice.
1. Print the first side of the paper.
2. Remove the paper from the output tray, straighten any curling
edges, and allow it to cool thoroughly.
3. Load the paper using the following guidelines:
Note: For best results when printing on the second side, feed
sheets individually or slip-feed (feed a blank sheet
between each printed sheet) to prevent toner from
sticking to adjacent pages.
a. Determine whether to load the media with the short or long
edge first. See "Loading Media" earlier in this chapter.
b. Print a test page or check your software documentation
to determine the orientation of the media's top edge.
c. Load media into the multipurpose feeder print side up.
4. Print the second side.
7-10 Media Optionsbb ______________________________________