Remove Paper From Standard Output Bin; Replace All Originals If Restarting Job - Lexmark CX510 Series User Manual

Troubleshooting
Remove packaging material, [area name]
1
Remove any remaining packing material from the indicated location.
2
From the printer control panel, touch Continue to clear the message.

Remove paper from standard output bin

Remove the paper stack from the standard bin.

Replace all originals if restarting job.

Try one or more of the following:
• Touch Cancel job to clear the message and cancel the scan job.
•
Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan
job.
•
Touch Scan from flatbed to continue scanning from the scanner immediately after the last successful scan job.
• Touch Finish job without further scanning to end the last successful scan job.
• Touch Restart job to restart the scan job with the same settings from the previous scan job.
Replace [color] cartridge, 0 estimated pages remain [88.xy]
Replace the indicated toner cartridge to clear the message and continue printing. For more information, see the
instruction sheet that came with the supply.
Note: If you do not have a replacement cartridge, then see the "Ordering supplies" section of the User's Guide or
visit www.lexmark.com.
Replace [color] cartridge, printer region mismatch [42.xy]
Install a toner cartridge that matches the region number of the printer. x indicates the value of the printer region. y
indicates the value of the cartridge region. x and y can have the following values:
Region number
0
1
2
8
9
Notes:
•
The x and y values represent .xy in the error code that appears on the printer control panel.
• The x and y values must match for printing to continue.
Region
Global
United States, Canada
European Union (EU), European Economic Area (EEA), Switzerland
Rest of the world
Invalid
259