Remove Paper From Standard Output Bin; Replace All Originals If Restarting Job - Lexmark MX310 User Manual

Troubleshooting

Remove paper from standard output bin

Remove the paper stack from the standard bin. The printer automatically detects paper removal and
resumes printing.
If removing the paper does not clear the message, then select Continue on the printer control panel. For
non-touch-screen printer models, press

Replace all originals if restarting job.

From the printer control panel, try one or more of the following:
•
Select Cancel job to clear the message and cancel the scan job.
•
Select Scan from automatic feeder to continue scanning from the ADF immediately after the last
successful scan job.
•
Select Scan from flatbed to continue scanning from the scanner immediately after the last successful
scan job.
•
Select Finish job without further scanning to end the last successful scan job.
•
Select Restart job to restart the scan job with the same settings from the previous scan job.
•
For non‑touch‑screen printer models, press
Replace cartridge, printer region mismatch [42.xy]
Install a toner cartridge that matches the region number of the printer. x indicates the value of the printer
region. y indicates the value of the cartridge region. x and y can have the following values:
Printer and toner cartridge regions
Region number
0
1
2
3
4
5
9
Notes:
•
The x and y values represent .xy in the code that appears on the printer control panel.
•
The x and y values must match for printing to continue.
Replace defective imaging unit [31.xy]
Replace the defective imaging unit to clear the message. For more information, see the instruction sheet
that came with the supply or see the "Replacing supplies" section of the User's Guide.
to confirm.
Region
Global
United States, Canada
European Economic Area (EEA), Switzerland
Asia Pacific, Australia, New Zealand
Latin America
Africa, Middle East, rest of Europe
Invalid
to confirm.
186