Changing The Pitch Of Groove Clips - CAKEWALK SONAR User Manual

:
5. Click on the clip and drag it one measure to the left.
Like this:
The Drag and Drop Options dialog appears.
6. In the Drag and Drop Options dialog, click Blend Old and New and click OK.
You have added Groove clips and edited them. Your project should look like this:
Let's take a listen to what we have. Click the Play button in the Transport toolbar.

Changing the Pitch of Groove Clips

Now that you have heard what your project sounds like, let's change some pitch settings.
To Set a Groove Clip to Not Follow the Project Pitch
1. Double-click on the Groove clip in Track 4.
The Loop Construction view appears.
2. Deselect the Follow Project Pitch button
3. Close the Loop Construction view and listen to your project again.
It sounds different because the Groove clip on Track 4 is no longer following the default project
pitch of E, instead it follows its own root note of C.
Next, let's add some pitch markers.
To Add Pitch Markers
1. Click the Solo button
88
.
in Track 4 to solo the track.