CAKEWALK SONAR User Manual page 365

Sound controls in the Console view are grouped in modules. There are several types of modules:
Module type... What you can do...
MIDI track Set the track's output, channel, bank, and patch; set the input; mute,
solo, and arm the track; set channel volume, panning, chorus, and
reverb levels; add real-time effects
Audio track Set the track's output (bus or Main out destination); choose an input;
monitor input levels; mute, solo, and arm the track; set track volume and
panning; add real-time effects; send audio data to buses or main outs.
Synth track Set the track's output (bus or Main out destination); set the input; mute
and solo the track; set track volume and panning; add real-time effects;
send audio data to buses or main outs.
Bus Receive input from one or more audio tracks, add real-time effects, and
send the results to a main out or another bus
Main outs Monitor output levels using meters and control the stereo volume of
audio to an output on your audio interface. To adjust both the left and
right volume levels at the same time, use the Link button
module.
One module's name is always outlined with a white line. This corresponds to the track with the focus.
You can change the focus by clicking to the right of the module's volume fader.
for that
365