CAKEWALK SONAR User Manual page 301

Key
From, To
Transposition Map
Constrain to Scale
To Transpose MIDI Data
1. Select the data to be affected.
2. Choose MIDI Effects-Cakewalk FX-Transpose from the Process menu or from the popup menu
to open the Transpose dialog box.
3. Set the transposition options as described in the table above.
4. Click OK.
SONAR transposes the selected data according to the options you specified.
For Diatonic transposition, the key in which the transposition is
made.
For Key/Scale transposition, the starting and ending key and
scale.
A table of pitch mappings for the specified transposition. You can
select to show the pitches as note names or as note numbers.
For Diatonic and Key/Scale transpositions, pitches not in the
starting (from) key are indented.
To Change a pitch mapping, click on a From pitch and select a To
pitch with the popup slider. If you change a pitch mapping, the
transposition type is automatically set to Custom Map.
For Diatonic and Key/Scale transpositions, forces all non-scale
notes to be transposed to the nearest appropriate scale tone.
301