Table of Contents
Advertisement
:
Keyboard display
5.
When you're through choosing scale degrees, click the Close button to save your changes.
To Restore a Scale or Scales to Factory Settings
1.
Open the Scale Manager dialog.
2.
If you want to restore a particular scale to factory settings, select it in the Scale: field, click the
Defaults button, and in the Scale Defaults dialog, select Restore Current Scale (if factory), and
click OK.
3.
If you have deleted a factory-supplied scale and want to replace it with the original version, click
the Defaults button, and in the Scale Defaults dialog, select Restore Any Missing Scales, and click
OK.
4.
If you want to restore all factory-supplied scales to factory settings, click the Defaults button, and
in the Scale Defaults dialog, select Restore All Factory Scales, and click OK.
To Choose How SONAR Handles Non-scale Notes
1.
Open the Snap Settings dialog by clicking the dropdown arrow in the Scale menu, and choosing
Snap Settings from the menu that appears. You can also use the Track-Snap to Scale-Scales-
Snap Settings command, or the right-click menu in the Track List pane of the Piano Roll view.
2.
Choose one of the following options:
•
Adjust to Next, Higher Note—if you choose this option, SONAR moves any non-scale note that
you move to the next higher note in the selected scale.
•
Adjust to Previous, Lower Note—if you choose this option, SONAR moves any non-scale note
that you move to the previous, lower note in the selected scale.
•
Adjust to Nearest Note—if you choose this option, SONAR moves any non-scale note that you
move to the note that is closest in pitch in the selected scale.
Searching for Events
The events in a project have many different parameters. For example, all MIDI notes have a channel,
starting time, pitch, velocity, and duration. Controllers have a controller number and value. SONAR
makes it simple to find, select, and modify events that have certain values for specific attributes.
Here are some of the things you can do and the commands that you would use to do them:
Action...
Search through a project to find the first event that has specific
attributes, and then search again to find the next such event
282
Scale degree buttons
Command...
Go-Search, Go-Search Next
Advertisement
Table of Contents
Troubleshooting
