Table of Contents
Advertisement
:
224
2.
Select the
tool.
3.
Drag a line in the graph from the starting time and tempo to the ending time and
tempo.
SONAR introduces a linear series of tempo changes.
To Draw a Series of Tempo Changes in the Tempo View
1.
Enable Groove Clip Looping on any audio clips that you want to follow the tempo
changes. Do this by selecting one or more clips, right-clicking a selected clip, and
choosing Groove-Clip Looping from the popup menu. Each clip that has Groove Clip
Looping enabled has beveled edges instead of sharp corners. The same command
disables Groove Clip Looping on any selected clip that has Groove Clip Looping enabled.
2.
Select the
tool.
3.
Drag the cursor across the graph, adjusting the tempo level as you move left to right.
SONAR introduces a series of tempo changes.
To Erase Tempo Changes in the Tempo View
1.
Enable Groove Clip Looping on any audio clips that you want to follow the tempo
changes. Do this by selecting one or more clips, right-clicking a selected clip, and
choosing Groove-Clip Looping from the popup menu. Each clip that has Groove Clip
Looping enabled has beveled edges instead of sharp corners. The same command
disables Groove Clip Looping on any selected clip that has Groove Clip Looping enabled.
2.
Select the
tool.
3.
Drag the mouse over the graph to highlight the region you want to erase.
4.
Release the mouse button.
SONAR deletes all tempo changes in the area you marked. The last tempo setting prior to
the erased region is now in effect in that region.
To Insert a Tempo Change in the Tempo List in the Tempo View
1.
Enable Groove Clip Looping on any audio clips that you want to follow the tempo
changes. Do this by selecting one or more clips, right-clicking a selected clip, and
choosing Groove-Clip Looping from the popup menu. Each clip that has Groove Clip
Looping enabled has beveled edges instead of sharp corners. The same command
disables Groove Clip Looping on any selected clip that has Groove Clip Looping enabled.
2.
Click the Tempo List button
3.
Select any tempo change in the list.
4.
Click Insert Tempo
5.
Set the tempo, time, and other properties.
6.
Click OK.
SONAR inserts the new tempo into the list.
To Edit a Tempo Change in the Tempo View
1.
Enable Groove Clip Looping on any audio clips that you want to follow the tempo
changes. Do this by selecting one or more clips, right-clicking a selected clip, and
choosing Groove-Clip Looping from the popup menu. Each clip that has Groove Clip
to display or hide the tempo list.
to open the Tempo dialog box.
Advertisement
Table of Contents
Troubleshooting
