Table of Contents
Advertisement
2.
In the Map Properties dialog, enter a new value in the Note Out field and press the Enter key, or
use the +/- buttons to change the value and press the Enter key.
To Change Multiple Note Out Settings
1.
Open the Drum Map Manager.
2.
In the Drum Map Manager, select a contiguous range of rows by selecting the first in the range,
and holding down the Shift key while selecting the last in the range.
Or
Select a non-contiguous range by selecting one row and holding down the Ctrl key while selecting
additional rows.
3.
Hold down both the Ctrl and Shift keys while selecting a new Output in the Output column.
To Mute or Solo a Mapped Note
The Mute and Solo controls in the Note Map pane allow you to mute or solo an individual mapped note.
To mute or solo a mapped note, use the following procedure:
•
In the Note Map pane, click the Mute
Or
•
Right-click on the row you want to mute or solo and select Mute or Solo from the menu that
appears.
To Display the Note In and Note Out Values By Their Pitch Name
You have the option of showing the Note In and Note Out values by their pitch names. To do so, use the
following procedure:
•
Right-click on any row in the Note Map pane and select the Display Pitch Names command from
the menu that appears.
To Change the Order of Mapped Notes in the Drum Map Pane
Use the following procedure to change the order of mapped notes in the Note Map pane.
1.
Move your cursor over the row you want to move in the Note Map pane.
2.
When your cursor changes to look like this
and release the mouse button.
The Drum Grid Pane
The Drum Grid pane is where you edit your drum tracks. The Drum Grid pane is the top pane in the
Piano Roll view and opens automatically when you open a MIDI drum track.
Grid Lines
The Drum Grid pane is divided into a time grid. You can set the resolution of the grid lines from 1/4 note
to 1/64 note, or to follow the current snap grid setting.
The Show/Hide Grid Lines combo button
and sets the grid line resolution.
or Solo
button in the appropriate row.
, click and drag the row to the place you want it to be
toggles on and off the grid lines in the Drum Grid pane
311
Advertisement
Table of Contents
Troubleshooting
