Transposing Midi Notes With The Transpose Midi Effect - CAKEWALK SONAR User Manual

:
Scale velocities to X% of
their current value
Change gradually from X to
Y
Change gradually from X%
to Y%
Limit range from X to Y
Randomize by +/- X
Tendency
To Change Note Velocities
1. Select the data to be affected.
2. Choose MIDI Effects-Cakewalk FX-Velocity from the Process menu or from the popup menu to
open the Velocity dialog box.
3. Select options as described in the table above.
4. Click OK.
SONAR changes note velocities according to the specified options.

Transposing MIDI Notes with the Transpose MIDI Effect

The Process-MIDI Effects-Cakewalk FX-Transpose command is a flexible transposition feature. You
can perform simple chromatic or diatonic transpositions, transpose from one key to another, or define
your own custom transposition.
The transpose options are as follows:
Parameter/Option...
Interval
Diatonic
Key/Scale
Custom Map
Offset
300
Multiplies all velocities by a constant factor.
Creates a smooth velocity change across the selection.
Scales velocities by a gradually changing factor.
Brings all velocities into the specified range.
Adds or subtracts a random offset from each velocity. You must
also specify the maximum offset. You can select this option in
addition to one of the previous options.
The tendency of the random offset to be lower or higher, on a
scale from -10 to 10.
Meaning...
Specifies chromatic transposition. Transposes notes by the
specified number of steps.
Specifies diatonic transposition. Transposes notes by the
specified number of scale steps within the specified scale.
Specifies transposition from one scale and key to another.
Specifies custom transposition as defined by the map.
For Interval transposition, the number of steps for the
transposition.
For Diatonic Transposition, the number of scale degrees for the
transposition.
For Key/Scale transposition, a number of octaves added to each
note after transposition.