Nudge - CAKEWALK SONAR User Manual

:

Nudge

198
2. Right-click on the selected clip and choose Clip Properties. SONAR opens the Clip
Properties dialog box.
3. Enter a new start time, or use the spinners or keyboard to change the start time.
4. Click OK when you are done.
SONAR moves the clip to the start time you chose.
To Copy Clips Using Drag and Drop
1. Select the clips you want to copy.
2. Enable the Snap Grid, if desired.
3. Position the mouse over one of the selected clips.
4. Press and hold the Ctrl key and click and hold the left mouse button. A rectangle is
displayed around the selected clips.
5. Drag the clips to the new location, and release the mouse button.
6. If necessary, choose the options you want from the Drag and Drop Options dialog box,
and click OK.
SONAR copies the clips to their new location.
To Copy Clips Using Copy and Paste
1. Select the clips you want to copy.
2. Choose Edit-Copy to display the Copy dialog box.
3. Choose the options you want and click OK. SONAR copies the clips to the Windows
clipboard.
4. Click in the Track pane to set the current track to be the one where clips should be
pasted.
5. Set the Now time to be the time the clips should be pasted.
6. Choose Edit-Paste to display the Paste dialog box.
7. Choose the options you want and click OK.
SONAR copies the clips to their new location.
To Delete Clips
1. Select the clips you want to delete.
2. Do one of the following:
• Choose Edit-Delete, which brings up a dialog box—choose options and click OK.
• Press the Delete key.
SONAR deletes the selected clips.
Nudging is moving a clip or a MIDI note by a small amount to the left or right or up and
down. There are three customizable settings for the Nudge feature. You can also nudge clips
(in the Track view) or notes (in the Piano Roll view) up or down, and you can use keyboard
shortcuts (see "To Nudge a Clip Using Keyboard Shortcuts" on page 200).