Table of Contents
Advertisement
:
To Show or Hide Meters in the Track View
•
Click the Show/Hide Meters button
the Show/Hide Meters button to display only the meters you want to see or to customize the
appearance of your meters.
Option...
Record meters
Playback meters
Output bus meters
For more information about metering options, see "Changing the Meters' Display" on page 380.
To Change a Meter's Range
•
Right-click on the meter and choose a new range.
To Add a Bus
1.
Right-click in the Bus pane (to add a bus at the end of the current buses) or over an existing bus (to
add a bus before it).
2.
Select Insert Bus from the menu that appears.
A bus appears in the Bus pane.
To Delete a Bus
1.
Right-click in the Bus pane over an existing bus.
2.
Select Delete Bus from the menu that appears.
The bus is deleted from the Bus pane.
Note: If you have any track or bus routed through the bus you delete, the signal will be rerouted to the
deleted bus's output.
To Create a Bus Send in a Track
1.
Right-click in an empty part of the Track pane (Track view) or a track module (Console view).
2.
Select Insert Send for a list of buses available.
3.
Select a bus from the list.
To Set the Snap-to Position of a Knob or Fader
1.
Set the control to the desired position.
2.
Right-click on the control and choose Set Snap-To=Current.
From now on, the control returns to this position when double-clicked.
To Insert a New Track
1.
Right-click on an empty area in the Console view or on the title bar of a track in the Track view.
2.
Choose Insert Audio Track or Insert MIDI Track.
SONAR adds a new track to the project.
To Rename a Track or Bus
1.
In the Console view, click on the module name. In the Track view double-click on the Track name.
2.
Type a new name.
370
to display all meters or click on the arrow to the right of
What it does...
Displays record meters for any armed track.
Displays playback meters.
Displays meters in buses
Advertisement
Table of Contents
Troubleshooting
