CAKEWALK SONAR User Manual page 558

558
No MIDI output device is selected.
Your sound card or MIDI interface is not set
up correctly.
You may have too many MIDI drivers.
Your MIDI driver is incorrect or outdated.
Your MIDI driver is configured incorrectly.
If none of these suggestions works, check our website for additional suggestions or contact
technical support.
Choose Options-MIDI Devices, and check the
Output device list. Make sure that your computer
sound card is highlighted and at the top of the
list. If this doesn't work, try choosing different
output devices, one at a time, to see if any of
them produces sound.
Make sure you have installed and tested each
card according to the manufacturer's
instructions.
Make sure you only install the drivers that you
need, and remove any old or unused drivers. To
access the driver list, choose Start-Settings-
Control Panel, then double-click Multimedia
and click on the Advanced tab.
Make sure that the driver you have installed is
the correct driver for your hardware. Also try
downloading and installing the latest driver
release from your hardware manufacturer.
Make sure the driver's IRQ and port address
settings match the physical settings on the card.