Table of Contents
Advertisement
To Enable or Disable Video Playback
1.
Open the Video view by choosing View-Video.
2.
Right-click in the Video view and choose Animate.
If your computer is not fast enough to play back video efficiently, you can get better performance by
temporarily disabling video animation during playback.
To Set the Time Display Format
•
Click the time display to cycle between MBT, SMPTE, Frames and None
Or
•
Right-click in the Video view and choose an option from the Time Display Format menu:
To do this...
Select a time format
Change font or font color
Turn off the time display
To Adjust the SMPTE Time
1.
Move the Now time to the place where you want SMPTE time to be either 00:00:00:00, or a number
you can enter.
2.
Use the Transport-Set Timecode At Now command to open the Set Timecode At Now TIme
dialog.
3.
If you want to set SMPTE time to 00:00:00:00 (the dialog's default value) at the current Now time,
click OK to close the dialog. If you want to set SMPTE time to some other value at the current Now
time, type that value into the SMPTE/MTC Time field, and click OK to close the dialog.
To Choose a Frame Rate
1.
Use the Options-Project command to open the Project Options dialog.
2.
On the Clock tab, under Timecode Format, choose the frame rate you want from the six choices,
and then click OK (for more information, see SMPTE/MIDI Time Code Synchronization"SMPTE/
MIDI Time Code Synchronization" on page 532).
Do this...
Choose MBT, SMPTE, Frames or None
Choose Font and select new font characteristics
Choose None
137
Advertisement
Table of Contents
Troubleshooting
