Table of Contents
Advertisement
•
Use the Track-Sort command to rearrange the tracks in order based on the track
name, status, or other setting.
To Drag a Track to a New Position
1.
Position the mouse just to the right of the track number, over the track icon of the track
you want to move.
The cursor changes to an up/down arrow.
2.
Drag the track to its new location, and release the mouse button.
SONAR rearranges and renumbers the tracks.
You can sort the tracks in a project based on several parameters, in either ascending or
descending order:
Sort by...
Name
Size, output, or channel
Muted, archived, selected
No matter how you sort, blank tracks always go to the end of the list.
Note that track numbers are used for reference only. When you re-arrange the order of
tracks, they are automatically assigned sequential numbers based on the order in which they
are displayed in the Track view.
To Sort the Tracks
1.
Choose Track-Sort to display the Sort Tracks dialog box.
2.
Choose the attribute by which to sort from the Sort By list:
Attribute...
Name
Muted
Archived
What happens...
Ascending puts track in alphabetic order,
descending puts them in reverse order
Ascending puts them in increasing numeric order,
descending puts them in decreasing numeric order
Ascending puts qualifying tracks at the end,
descending puts them at the beginning
How it works...
If you choose this attribute, SONAR puts the tracks into
alphabetical order, either ascending or descending, depending
on what you choose in the Order list.
If you choose this attribute, SONAR puts all the muted tracks at
either the top or bottom of the Tracks window, depending on
whether you choose descending (top) or ascending (bottom) in
the Order list.
If you choose this attribute, SONAR puts all the archived tracks
at either the top or bottom of the Tracks window, depending on
whether you choose descending (top) or ascending (bottom) in
the Order list.
185
Advertisement
Table of Contents
Troubleshooting
