The Hard Disk Installation - Planet UMG-2000 User Manual

Unified office

Hide thumbs Also See for UMG-2000:

Table of Contents

2.1.8 The Hard Disk Installation

The SATA subsystem supports four hot-swappable hard drives. The SATA drives are

inserted to the SATA backplane that provides power and bus termination.

Note:

Please install at least one HDD to the No.1 disk carrier before system configurations.

For single HDD, please select RAID level to JBOD.

Locate the storage subassembly.

Press the

disk carrier switch to unlock the carrier.

Unplug the disk carrier by pulling the carrier handler.

Mount the disk into the carrier and load the fixing screws.

Press the

disk carrier switch to

Close the disk carrier lock/switch to lock the carrier.

insert the carrier to the disk slot.

Table of Contents