Table of Contents
Advertisement
3.2 Spanning Tree Protocol
Spanning Tree Protocol (STP) is a link management protocol that provides path
redundancy while preventing undesirable loops in the network. For an Ethernet network to
function properly, only one active path can exist between two stations. The UMG-2000 uses
STP on the switch (Port 1 to Port 26) to detect the loop link. If the loop occurs, the
information will be presented in the "Overview" page. Then, unplug the indicated cable and
check your physical Ethernet link.
3.3 Alert Log
The screen displays the UMG-2000 alert log list. If the administrator has assigned the alert
email address, the messages will be sent to the added email address.
Date: Displays the date of the alert log.
Time: Displays the time of the alert log.
ID: Displays the alert log ID.
Description: Displays the detail description of the alert Log.
33
Advertisement
Table of Contents
