Table of Contents
Advertisement
13.3 Remote Calls
Once the connection is settled, the database of all the branches and the voice link will be
setup automatically. This means that users can call the extensions in the UMG-2000 group
once the connection is settled. For example, a user of the headquarter named user_hq with
the extension "1456" can call the user named user_div1 with the extension "5678" by
dialing "5678" directly. If another UMG-2000 joins the UMG-2000 group as a new division
and the user named user_div2 with extension 7890 is in it, the three users can call each
other directly. Any call features in the call group e.g., call transfer, conference, and call
forwarding is available between connected branches. All calls between extensions in
different branches are visa VoIP without paying any long distance changes.
Note:
The call prefix of the divisions is determined by the headquarter UMG.
13.4 Remote Data Synchronization
When a new division is added to the profile of the headquarter, two directories named
"FromBran-<location>-<prefix>" and "ToBran-<location>-<prefix>" (where <location>
stands for the location of the branch and <prefix> stands for the extension prefix of the
branch) are created, too. The former is used for receiving data from the specific branch and
the latter is used for sending data to the specific branch. When a headquarter is add to the
division's profile, two directories named "FromHQ" and "ToHQ" are also created. The former
one is used to receive the data from the headquarter and the latter one is for sending data
to the headquarter. All these directories will be shown in the page "Overview" of storage.
The following is the detailed mapping of the four directories:
Headquarter
ToBran-<location>-<prefix>
FromBran-<location>-<prefix>
The data will be synchronized every few minutes.
Note:
Data can only be synchronized automatically between the Headquarter and it associated
divisions when the link status is "connected".
Divisions
FromHQ
ToHQ
92
Advertisement
Table of Contents
