13.9 Delete a Branch
If the mode of your UMG-2000 is Headquarter, check the "Delete" check box in the page
"Overview" and then click the "Delete" button. The selected branch will then be deleted.
Note:
Delete a branch will delete the entire branch configuration profile.
13.10 Branch-to-Branch Setting
The "Branch-to-Branch Setting" page allows administrator to manage branch to branch.
There are three modes of Branch-to-Branch, Headquarter, Division, and Standalone.
OPERATION MODE
Standalone: Disables the Branch-to-Branch feature.
Headquarter: Specifies the operation mode to Headquarter.
Division: Specifies the operation mode to Branch.
ADD NEW BRANCH
Serial Number: Specifies the BTB serial number of the allowable branch.
Key: Generates the key that will be used as the authentication password when
building the connection between the UMG-2000 and the branch.
Call Prefix: Specifies the call prefix of the branch.
Remote Sync Data: Enables or disables the feature "Synchronize data" between the
UMG-2000 and the branch.
97