Table of Contents
Advertisement
8.2 IP PBX Feature Setting
Click the "Setting" tab in the "VoIP" screen. The VoIP "Setting" screen appears, allowing the
administrator to manage the IP PBX services and features. The IP PBX service and call
features can be globally or individually enabled or disabled.
CALL FEATURE SETTING
This section lists all the available setting of IP PBX. The IP PBX service is accessible only
when the VoIP service is enabled.
PBX Service: Enables or disables the IP PBX service
Call Forwarding: Enables or disables the feature "Call Forwarding". Enabling this
feature will allow the user in the UMG-2000 to forward the incoming calls to another
telephone. The call forwarding extension number can only be set by the individual
user in the personal account web administration.(Refer to Section - Personal Account
Web Administration )
Call Pickup: Enables or disables the feature "Call Pickup". Enabling this feature will
allow answering an incoming call to the specific extension from another phone within
the same call pick up group.
Do Not Disturb: Enables or disables the feature "Do Not Disturb". Enabling this feature
will prevent ringing of the incoming call.
Call Parking: Enables or disables the feature "Call Parking". Enabling this feature will
allow parking an incoming call and pick up it at another location.
Conference Record: Enables or disable the feature "Conference Record". Enabling
this feature will allow record conference.
Record Voice: Enables or disables the feature "Record Voice".
Call Prefix: Specifies the call prefix. All the extensions in the group will be prefixed with
the number.
AUDIO QUALITY TUNING OPTIONS
This section lists all the tunings of audio quality.
Receive Gain: Specifies the receive gain.
Transmit Gain: Specifies the transmit gain.
FAX Server
This section set the email address of fax receiver.
Fax to Email Address: the email address of fax receiver.
61
Advertisement
Table of Contents
