Printing Reports; Mfc Settings And Activity; Customizing The Transmission Verification Report - Brother MFC-4820C User Manual

10

Printing reports

MFC settings and activity

You need to set up the Transmission Verification Report and Activity
Report Interval in the menu table.
Menu/Set
Press
—OR—
Menu/Set
Press
Customizing the Transmission Verification
Report
You can use the Transmission Report as proof that you sent a fax.
This report lists the time and date of transmission and whether the
transmission was successful (OK). If you select ON or ON+IMAGE, the
report will print for every fax you send.
When the Verification Report is turned OFF, the report will only
print if there is a transmission error, and in the RESULT column
it will show NG.
If you send a lot of faxes to the same place, you may need more than
the job numbers to know which faxes you must send again.
Selecting ON+IMAGE or OFF+IMAGE will print a section of the fax's
first page on the report to help you remember.
1
Menu/Set
Press
2
Press
OFF+IMAGE, ON or ON+IMAGE.
Menu/Set
Press
3
Stop/Exit
Press
10 - 1 PRINTING REPORTS
2 4 1
, , , .
2 4 2
, , , .
2 4 1
, , , .
to select OFF,
.
.
REPORT SETTING
1.XMIT REPORT
REPORT SETTING
2.JOURNAL PERIOD
REPORT SETTING
1.XMIT REPORT