Setting Your Remote Access Code - Brother MFC-4820C User Manual

Setting your remote access code

The remote access code lets you access the Remote Retrieval
features when you are away from your MFC. Before you use the
remote access and retrieval features, you have to set up your own
code. The default code is inactive code (---
1
Menu/Set
Press
2
Enter a three-digit number from
000 to 998.
Menu/Set
Press
Do not use the same digits that appear in your Remote
Activation Code(
#
( 51).(See Operation from extension telephones on page 5-8.)
3
Stop/Exit
Press
You can change your code at any time by entering a new one.
If you want to make your code inactive, press
Step 2 to restore the inactive setting (---
2 5 3
, , , .
. (The " " cannot be changed.)
51) or Remote Deactivation Code
.
).
REMOTE FAX OPT
3.REMOTE ACCESS
Stop/Exit
).
REMOTE FAX OPTIONS 8 - 3
in