Brother MFC-4820C User Manual page 323

ERROR MESSAGES
ERROR CAUSE
MESSAGE
The print heads are too cold.
LOW
TEMPERATURE
The MFC has a mechanical problem.
MACHINE ERROR
XX
The media card is either bad or not formatted.
MEDIA ERROR
One or more of the ink cartridges are running
NEAR EMPTY
out of ink. If a sending machine has a colour
fax, the MFC's 'handshake' will request that
the fax be sent as black and white. If the
sending machine has the ability to convert it,
the colour fax will be received into memory as
a black and white fax.
The media card in the media drive does not
NO FILE
contain a .JPG file.
The number you dialed does not answer or is
NO RESPONSE/
busy.
BUSY
You tried to access a Speed Dial number that
NOT ASSIGNED
is not programmed.
The data is too large for the MFC's memory.
OUT OF MEMORY
The paper is jammed in the MFC.
PAPER JAM
You inserted a media card that cannot be
UNSUPPORTED
used.
CARD
TROUBLESHOOTING AND ROUTINE MAINTENANCE 23 - 3
ACTION
Allow the MFC to warm up.
Unplug the machine, and then call
Brother or your dealer for service.
Reinsert the correct media card.
Order a new ink cartridge.
Reinsert the correct media card.
Verify the number and try again.
Set up the Speed Dial number.
(See Storing Speed Dial numbers
on page 7-1.)
(See Out of memory message on
page 11-3.)
(See Printer Jam or Paper Jam on
page 23-4.)
Reinsert the correct media card.