Initial Setup; Getting Started; Setting The Paper Type - Brother MFC-4820C User Manual

4

Initial setup

Getting started

Setting the Paper Type

To get the best print quality, set the MFC for the type of paper you
are using.
1
Menu/Set
Press
2
Press to select PLAIN, INK JET,
GLOSSY or TRANSPARENCY.
Menu/Set
Press
3
If you selected GLOSSY, press
GLOSSY:4-COLOUR or GLOSSY:3-COLOUR.
Menu/Set
Press
The print quality of black ink varies depending on the kind of
glossy paper you are using. Black ink is used when you select
GLOSSY:4-COLOUR. If the glossy paper you are using repels
the black ink, select GLOSSY:3-COLOUR, which simulates black
ink by combining the three ink colours.
4
Stop/Exit
Press
The MFC ejects paper with printed surfaces face up onto the
paper tray in the front of the machine. When you use
transparencies or glossy paper, remove each sheet immediately
to prevent smudging or paper jams.
4 - 1 INITIAL SETUP
1 1
, , .
.
.
.
GENERAL SETUP
1.PAPER TYPE
to select