Out Of Memory Message; Manual Transmission - Brother MFC-4820C User Manual

6
Place the next page on the scanner
glass.
Menu/Set
Press
The MFC starts scanning. (Repeat Steps 5 and 6 for each
additional page.)Press

Out of Memory message

If you get an OUT OF MEMORY message while scanning the first page
Stop/Exit
of a fax, press
MEMORY message while scanning a subsequent page, you will have
the option to press
Stop/Exit
to press
If the memory is full and you are faxing a single page, it will be
sent in real time.

Manual Transmission

Manual transmission lets you hear the dialing, ringing and
fax-receiving tones while sending a fax.
1
Place the original face down on the scanner glass.
Speaker Phone
Press
2
Dial the fax number you want to call.
3
When you hear the fax tone,
Fax Start
press
4
1
Press to send a fax.
You cannot send multiple pages.
6 - 4 SETUP SEND
.
Stop/Exit
to cancel the scan. If you get an OUT OF
Fax Start
to send the pages scanned so far, or
to cancel the operation.
and listen for a dial tone.
.
SET NEXT PAGE
THEN PRESS SET
to cancel.
1.SEND 2.RECEIVE