Brother MFC-4820C User Manual page 120

Remote commands
95 Change the Fax Forwarding
settings
1 OFF
2 Fax Forwarding
4 Fax Forwarding number
6 Fax Storage ON
7 Fax Storage OFF
96 Retrieve a fax
2 Retrieve all faxes
3 Erase faxes from the
memory
97 Check the Receiving
Status
1 Fax
2 VOICE
98 Change Receive Mode
1 TAD
2 FAX/TEL
3 FAX ONLY
90 Exit
8 - 6 REMOTE FAX OPTIONS
Operation details
If you hear one long beep, the change has
been accepted. If you hear three short beeps,
you cannot change it because the conditions
have not been met (for example, registering a
fax forwarding number). You can register your
Fax Forwarding number by entering 4. Fax
Forwarding number (see page 8-7). Once you
have registered the number, the MFC will
change to FAX FORWARD:ON mode.
You can turn FAX STORAGE to ON (or OFF
after you have retrieved or erased all your
messages).
Enter the number of a remote fax machine to
receive stored fax messages. (See page 8-7.)
If you hear one long beep, you can erase fax
messages from the memory.
You can check whether your MFC has
received any FAX or VOICE messages. If
yes, you will hear one long beep. If no, you will
hear three short beeps.
If you hear one long beep, you can change
the Receive Mode.
After a long beep, you can exit Remote
Retrieval.