Setting The F/T Ring Time (Fax/Tel Mode Only); Setting The Fax/Tel Announcement - Brother MFC-4820C User Manual

Setting the F/T Ring Time (FAX/TEL mode only)

If you set the Receive Mode to FAX/TEL, you'll need to decide how
long the MFC will signal you with its special pseudo/double-ring when
you have a voice call. (If it's a fax call, the MFC prints the fax.) This
ringing happens after the initial ringing from the phone company. Only
the fax machine rings (for 20, 30, 40 or 70 seconds) and no other
phones on the same line will ring with the special pseudo/double-ring.
However, you can answer the call on the same line as the MFC. (See
Operation from extension telephones on page 5-8.)
1
Menu/Set
Press
2
Press
MFC will ring to alert you that you
have a voice call.
Menu/Set
Press
3
Stop/Exit
Press
Even if the caller hangs up during the pseudo/double-ringing,
the machine will continue to ring for the set time.

Setting the FAX/TEL Announcement

For the FAX/TEL receive mode, you can set up the MFC to play an
outgoing announcement for callers when no one is there to answer
calls. (See Record FAX/TEL Outgoing Announcement
(F/T MESSAGE) on page 9-8.)
2 1 3
, , , .
to select how long the
.
.
SETUP RECEIVE
3.F/T RING TIME
SETUP RECEIVE 5 - 5